|
Installation
Pictures
(Click on any of the
pictures below for a larger, more detailed view.) |
 |
2/2/2000. The subwoofer enclosure
after being covered in fleece prior to the application of fiberglass.
|
| |
|
 |
2/2/2000. The subwoofer enclosure
after the preliminary application of fiberglass resin.
|
| |
|
 |
2/4/2000. The rough sub box placed
in the vehicle to check the fit.
|
| |
|
 |
2/8/2000. The subwoofer enclosure
nearing completion.
|
| |
|
 |
2/9/2000. Top view of the completed
sub box.
|
| |
|
 |
2/9/2000. Side view of the completed
subwoofer box.
|
| |
|
 |
2/9/2000. The a/d/s/ subwoofers are
loaded into the sub box, ready for installation into the vehicle.
|
| |
|
 |
2/9/2000. The loaded subwoofer
installed in the Beetle.
|
| |
|
 |
2/9/2000. Fabrication underway on the
amp rack which is fitted on top of the subwoofer.
|
| |
|
 |
2/16/2000. Installer Greg Weeks doing
finish sanding on the amp rack.
|
| |
|
 |
2/16/2000. The amp rack being sanded in
the wood shop.
|
| |
|
 |
2/16/2000. The rough amp rack being
fitted into the trunk above the subwoofer.
|
| |
|
 |
2/29/2000. The metal mesh grille
fitted above the subwoofers.
|
| |
|
 |
3/2/2000. The amp rack is fitted and
the amps are getting ready to be wired.
|
| |
|
 |
3/3/2000. The amps are wired and
fitted to the amp rack. The amp rack is now ready to be wrapped with
vinyl.
|
| |
|
 |
3/3/2000. The trim pieces in the
prep area prior to being wrapped with vinyl.
|
| |
|
 |
3/3/2000. Another view of the trim
pieces.
|
| |
|
 |
3/6/2000. The amplifier trim piece
covered with vinyl and ready for final installation.
|
| |
|
